Tokugawa Corporate Forums
http://fullmotionvideo.free.fr/phpBB3/

New to pc98 and have some questions.
http://fullmotionvideo.free.fr/phpBB3/viewtopic.php?f=1&t=1399
Page 1 of 1

Author:  Xalphenos [ August 27th, 2013, 2:07 am ]
Post subject:  New to pc98 and have some questions.

Hey I'm Xalphenos and I'm new here. Thanks for letting me join your group.

Ok I've been messing around with hacking pc98 games, specifically Aiza, and I was wondering if I should spend the time trying to pull off a variable width font.

As far as emulators go do most people just use whatever font that gets generated when the emulator is first run or does everyone stick to the amex font or some other standard font?

As far as real hardware goes does each system have the same system font or, as I suspect, did the font change between hardware revisions?

I ask because if everyone is essentially using a different font there's no real point trying to do a vwf since the widths of all the different fonts would be different. In that case the only options would be to either try inserting my own font or determine the widths on the fly. Both would probably be harder.

Last question. According to the bitmap header for the amex font it is 1bpp, I've not actually checked further. Is this true of all system fonts?

Oh yeah, last last question for real. Does anyone have any documentation on the pc98 keyboard connector, or any pc98 technical documentation at all?

Thanks.

Author:  delicious [ August 27th, 2013, 3:11 pm ]
Post subject:  Re: New to pc98 and have some questions.

http://nkmm.org/yagura/lib/
→PC-98 keyboard connector miniDIN8Pin

Or
http://www.amazon.co.jp/s/ref=sr_st?__m ... -desc-rank

http://www.webtech.co.jp/company/doc/undocumented_mem/
→UNDOCUMENTED 9801/9821 Vol.2 - Memory・I/O port

http://www.vector.co.jp/soft/dl/data/ha ... 16321.html
◎ Physical format of floppy disk
◎ Physical format of hard disk
◎ DISK BIOS
◎ HARD DISK BIOS
◎ SCSI interface common BIOS
◎ Work area of DISK BIOS
◎ Format of IPL
◎ logical format of MS-DOS
◎ logical format of hard disk
◎ logical format of MO
◎ internal variable of MS-DOS disk
◎ MS-DOS's device driver
◎ work areaof IO.SYS
◎ logical format of N88-BASIC(86)
◎ logical format of CP/M(86)

ftp://ftp.abk.nu/pub/text/
This directory contains that follows:
dos/ About DOS functions and devices drivers
dosext/ About DOS memory managing specifications
pc98/ About PC-98x1 series computer's devices and BIOS
protocol/ About X/Y/Z/etc modems protocols

Author:  Xalphenos [ August 28th, 2013, 2:40 am ]
Post subject:  Re: New to pc98 and have some questions.

Thanks for all the info. It'll take me forever to read through being Japanese but I guessed that would be the case.

Thanks again.

Author:  Ryo-Cokey [ December 15th, 2020, 11:37 pm ]
Post subject:  Re: New to pc98 and have some questions.

Yes, this is breaking new frontiers in necroposting, but here we go:

First of all, thank you for the link to that tutorial. It's extremely insightful. Wish I'd found it sooner.

Here's the part in the tutorial that's blowing my mind, though:

Quote:
▼論理クラスタと物理シリンダ,ヘッド,セクタの対応表(N88-BASIC(86) 2HD(2DD))
・・・・・・・・・・・・・・・・・・・・・・
・ Cluster・ Cylinder Head Sector ・
・・・・・・・・・・・・・・・・・・・・・・
・ 0 ・ 0 0 1~26(16) ・ クラスタ = シリンダ*ヘッド数+ヘッド
・ 1 ・ 0 1 1~26(16) ・ シリンダ= クラスタ\ヘッド数
・ 2 ・ 1 0 1~26(16) ・ ヘッド = クラスタMODヘッド数
・ 3 ・ 1 1 1~26(16) ・
・ 4 ・ 2 0 1~26(16) ・ Clus = Cyl*Nh+Hd
・ 5 ・ 2 1 1~26(16) ・ Cyl = Clus/Nh
・ : ・ : : : ・ Hd = Clus%Nh
・ : ・ : : : ・ Sec = 1~26(16)
・ : ・ : : : ・
・ 151 ・ 75 1 1~26(16) ・
・ 152 ・ 76 0 1~26(16) ・
・ 153 ・ 76 1 1~26(16) ・
・ : ・ : : : ・
・ (158) ・ (79) 0 (1~16) ・
・ (159) ・ (79) 1 (1~16) ・
・・・・・・・・・・・・・・・・・・・・・・


...am I to understand that instead of using a Sector per Cluster value of 13 (which would render all the of the disk addressable, if they were just willing to use two bytes for the cluster) they just... made 38% of the disk unaddressable by the N88 Basic FAT?

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/